4.40 out of 5
-18% TODAY
main
dimention
usecase-1
usecase-2
usecase-3
usecase-4
usecase-5
SKU: GH-WMN-BLK-6INC

6 Inch Plastic Weed Mat Nails with Cap

6 inch plastic weed mat nails with cap

6 Inch Plastic Weed Mat Nails with Cap

Original price was: ₹989.00.Current price is: ₹729.00.

In stock

UV-stabilised 6 inch plastic weed mat nails with a wide flat cap and barbed shank, pins weed mat, mulch film, shade net, frost fleece, drip pipe and tarpaulin firmly in place. Same ₹8/piece in every pack size, from 100 to 1000 pieces.

4.40 out of 5

Original price was: ₹989.00.Current price is: ₹729.00.

Price includes GST · Shipping calculated at checkout

Clear
%Extra 10% off your first orderUse code WELCOME10. It is applied automatically in your cart.
Secure payment
  • UPI
  • Cards
  • Net banking

Processed securely by Cashfree Payments. We never store or see your card details.

Specifications

Length6 inch (approx. 15 cm)
MaterialUV-stabilised polypropylene
ColourBlack
HeadWide flat cap
ShankBarbed, with conical tip
UseWeed mat, mulch film, shade net, drip pipe
Pack sizes100 / 200 / 500 / 1000 pcs

6 inch UV-stabilised plastic nails for pinning weed mat, mulch film, shade net, frost fleece, drip pipe and tarpaulin to the ground. The wide flat cap spreads the load so fabric doesn’t tear, and the barbed shank grips firm garden soil to resist wind lift. Same ₹8 per piece across every pack size, from 100 to 1000 pieces.

  • 6 inchAbout 15 cm long
  • Wide flat capHolds without tearing
  • Barbed shankResists wind lift
  • UV-stabilisedPolypropylene

Key features

6 inch black plastic weed mat nail with its wide cap flush on weed mat in garden soil, a second nail showing the barbed shank and conical tip

  • Wide flat capHolds fabric down without tearing it.
  • Barbed shankGrips the soil and resists wind lift.
  • Conical tipPushes in by hand or with a light tap.
  • UV-stabilised polypropyleneWon’t rust or stain, and is safe to handle.
Soil cross-section showing a 6 inch weed mat nail with its barbs gripping firm garden soil and the cap flush on the weed mat

Strong barbed grip

The barbed shank bites into garden soil and resists pull-out, while the wide flat cap sits flush against the fabric so wind and rain can’t work a corner loose.

How to use

Hand pushing a plastic weed mat nail through the weed mat edge into firm garden soil, no tools needed

  1. Lay and stretch the fabric over the bed.
  2. Push a nail through the fabric every 1-1.5 m along the edges.
  3. Add nails every 30-50 cm along joins and overlaps.
  4. Tap gently with a mallet in harder ground.

Where to use it

Kitchen garden raised beds covered with weed mat pinned by flush plastic nail caps, tomato, brinjal and chilli growing through

  • Weed mat
  • Mulch film
  • Shade net
  • Frost fleece
  • Drip pipe
  • Tarpaulin
Black mulch film on a strawberry bed held flat by plastic weed mat nails with wide caps

Pins mulch film as well as weed mat

The same wide cap spreads pressure across thin plastic mulch film without puncturing or tearing it, keeping sheets flat and fully sealed against the soil.

Shade net over seedlings and frost fleece over a lettuce row, both pinned down with plastic weed mat nails

Holds shade net and frost fleece too

Works just as well on woven shade net and frost fleece, gripping mesh and lightweight fabric alike so covers stay anchored through wind and watering.

Tip: Choose our 7 inch nails for sandy, loose or windy sites, or our galvanized U-pins for extra hold.

Pairing with a weed mat roll? See our 0.6 m, 1 m or 1.5 m weed mat rolls.

FAQs

How many weed mat nails do I need?

Use the spacing in the how-to-use steps above, a nail every 1-1.5 m along the edges and every 30-50 cm along joins and overlaps, larger rolls need more nails than smaller ones. Pick a pack size with a few spares; all four sizes (100/200/500/1000) are priced the same per piece. Pairing with a roll? See our 0.6 m, 1 m or 1.5 m weed mat rolls.

Are plastic weed mat nails as strong as metal ones?

The barbed shank grips soil and resists wind lift much like a metal pin, without the risk of rusting, staining your fabric or leaving sharp edges to handle. For sandy, loose or very windy sites, our 7 inch nails or galvanized U-pins give extra hold.

Will these nails rust or stain my weed mat?

No, they’re UV-stabilised polypropylene, not metal, so they won’t rust, corrode or leave rust stains on your fabric the way steel pins can over time.

Can I use these for mulch film and shade net, not just weed mat?

Yes. The same wide cap and barbed shank work for mulch film, shade net, frost fleece, drip pipe and tarpaulin, anywhere you need to pin a fabric or film to the ground.

What’s the difference between the 6 inch and 7 inch nails?

Same cap, shank and material, the 7 inch nails are simply longer, giving extra grip in sandy, loose or windy sites. Choose 6 inch for regular garden and farm soil.

How deep should I push the nails in?

Push the nail through the fabric until the cap sits flush against it. That’s usually enough by hand in firm soil; in harder ground, tap it in gently with a mallet.

5 reviews for 6 Inch Plastic Weed Mat Nails with Cap

  1. 5 out of 5

    Indranil Das –

    Good option for pinning the fabric down around planting beds.

  2. 4 out of 5

    Amit Saha –

    Useful gardening accessory. Glad I ordered them with the mat.

  3. 4 out of 5

    Debashis Roy –

    Useful for securing the corners and edges of weed mat.

  4. 4 out of 5

    Kaushik Roy –

    Simple product but useful when you have a lot of mat to fix.

  5. 5 out of 5

    Arka Dutta –

    I needed something to hold the weed mat down and these are just right for that.


Only logged in customers who have purchased this product may leave a review.